707-99-66310 Boom Adjust Cylinder Seal Kit For Komatsu PC160LC-7K Excavator Rubber Repair Kit

Cause of problem: the main factor that causes oil seal to leak
Lax oil seal is the main factor causing oil leakage. When the shaft is worn to form grooves, even if the new oil seal is not sealed, it is because the contact pressure between the oil seal lip and the shaft drops, resulting in too small interference between the oil seal lip diameter and the shaft diameter after installation.
Taking S195 diesel engine crankshaft oil seal as an example, the main reasons for its lax seal are analyzed:
① Oil seal manufacturing quality is poor;
② Poor quality of shaft or bearing;
③ Improper use and maintenance;
(4) Improper installation;
⑤ Improper storage and adverse effects caused by environmental pollution [4].
The oil seal is not tight and the countermeasure of oil leakage
1. Master and identify the basic knowledge of fake and inferior products, and choose high-quality and standard oil seals.
2. During installation, if the outer surface roughness of the shaft diameter is low or has defects such as rust, rust, burr and so on, use fine emery cloth or whetstone to polish smooth; Apply clean oil or lubriC.A.Ting oil on the corresponding position of the oil seal lip or shaft diameter. The outer ring of the oil seal is coated with sealant, and the key slot of the shaft is wrapped with hard paper to avoid scratching the oil seal lip. The oil seal is rotated and pressed in with special tools. Do not hit hard to prevent the deformation of the oil seal or break the spring and failure; If the lip flanging, spring off and oil seal deflection must be removed and reloaded. It should be noted that when the shaft diameter is not worn and the oil seal spring is elastic enough, do not tighten the internal spring without authorization [4].
3, applied in the machinery of the oil seal generally bad working conditions, environmental temperature difference, dust, frequent vibration of the machine parts of the force constantly changing, to check, maintenance and maintenance.
4, such as the shaft diameter and bearing wear serious; Oil seal rubber aging or spring failure, should be repaired and replaced in time.
5, the abnormal heating components or assembly should be timely troubleshooting; Avoid mechanical overspeed and overload operation to prevent oil seal lip temperature rise, rubber aging, lip early wear and so on.
6, often check the oil level, if the oil impurities are too much, there should be alloy powder, metal iron filings to completely replace the new oil. The brand and quality of oil change should conform to seasonal requirements. Suggested that matt ray super sealant is added in the oil & lubricants, it is a wonderful gearbox additives, can be in an inert material film is formed on the parts, it can reduce the leakage of oil seal, prolong the service life of gear oil seal, also can reduce the noise of gear box, the matt ray super seal lubricants used or not for oil pollution caused by the deterioration of oil product.

Related Parts:

Product Show:

• Guangzhou Suncar Seals Co., Ltd. is a foreign trade company specializing in construction machinery seals. Suncar has a complete management center, professional product consulting services, innovative research and development of product production, efficient logistics and distribution and other organizational structures. At present, the company's business covers many regions at home and abroad.

• Suncar Seals entered the construction machinery oil seal industry in 2008 and has nearly 12 years of oil seal technology experience. Suncar Seals has always maintained its core technology advantages, advanced manufacturing and processing capabilities, scientific management system and complete after-sales system. It is recognized as one of the most promising companies in China's future mechanical oil seal business.

• Suncar Seals has a wealth of experience in production and processing and a good production environment. Product is used for excavators, bulldozers and wheel loaders of Komatsu, C.A.T, JCB, Hitachi, Sumitomo, Kobelco, SUNCARVO.L.VO, KATO, Daewoo, CASE, John Deere and other brands.

• Suncar Seals company provide construction machinery equipment such as loaders and crawler excavators provide high-quality, high-performance, long-life seals and vehicle parts, which solves the problem of maintenance and replacement of construction machinery parts for customers. Relying on its good reputation in the machinery industry, SUNCAR will always maintain its original intention, actively develop and create a unique brand belonging to the company, and provide customers with high-quality products at lower costs, better quality and good service.